1, maintain clean and hygienic, after the shutdown should remove the surrounding debris and dirt inside the machine.
2, each sliding guide column, bearings and sprocket must maintain a good lubrication state, often refueling.
3. The water filter in the gas path should be drained once every working shift. The oil mister should always be refueled to ensure the normal use of the solenoid valve and the good cylinder.
4. Each work shift should first check the oil level of the vacuum pump; the vacuum pump oil should be replaced once a month.
5, often observe the oil volume of the oil mister, adjust the amount of oil in a timely manner, the new machine is adjusted to increase the size, after a week can be reduced to ensure that each pneumatic component has sufficient lubrication.
