Guangdong Honggang Intelligent Equipment Co., Ltd.   (Focus on Hydraulic Cutting Machine Manufacturing Since 1994)
honggang cutting machine

cuttingmachine-hg1
0086 15918086545
Home > Resources > Articles > Cardboard Paper Cutting Machine Professional Introduction

Resources

Cardboard Paper Cutting Machine Professional Introduction

Cardboard Paper Cutting Machine Professional Introduction


Cardboard is also called board paper. Thick paper sheets composed of various pulps and intertwined with fibers. The difference between paperboard and paper is usually to distinguish between quantitative and thickness, generally the amount is more than 250g/m2, thickness is greater than 0.5mm called paperboard (also said: generally the paper thickness greater than 0.1mm is called paperboard. General quantitative less than 250g / M2 is considered to be paper, and a ration of 250 g/m2 or more is considered to be cardboard).

Cardboard can be divided into several categories depending on the use:
(1) Packaging cardboard, such as cardboard, Kraft cardboard, yellow cardboard, white paperboard, impregnated linerboard, etc.
(2) Industrial technical paperboard, such as electrical insulation board, asphalt waterproof board, etc.
(3) Construction board, such as linoleum paper, sound insulation board, fireproof board, gypsum board, etc.
(4) Cardboard for printing and decorating, such as type cardboard, cover cardboard, etc.

HONGGANG cardboard paper cutting machine features:
Hydraulic cutting machine is characterized by: When the punching die through the die action on the workpiece at the moment, the pressure inside the acting cylinder does not reach the rated pressure, the pressure will increase with the time (contact cut into the work) and increase until The electromagnetic commutation valve receives a signal, the directional valve is commutated, and the punching head begins to reset; at this time, the pressure in the fuel tank may not reach the set rated pressure value due to the time limit of the pressure oil entering the oil cylinder; Say, the system pressure has not reached the design value, the punching has been completed.

The use of cutting machine:
Suitable for non-metallic materials such as foamed materials, cardboard, textiles, plastic materials, leather, rubber, packaging materials, floor materials, carpets, fiberglass, cork, etc., through die cutters to achieve punching and cutting of materials through the punching pressure generated by the machine.

cardboard paper cutting machine

http://www.hgcuttingsystems.com