Auto double side feeding car interiors sealing and cutting machine

FAQ

About Mold:

1. Is it difficult to install or change pattern plates?

-> no difficult, it is easy to install and change.

2. Are they heavy? Can one person change a plate, or is it too heavy? 

-> Plate is a big size if one worker will be have little difficulty if two workers are so easy.

3. Do the pattern plates have electric wires to connect with the machine? May be screwed? If yes, will you give us instructions on how to connect it?

-> plate does not have wire to connect, the electric wire should be connected to our machine heating plate, not embossing plate.

4.some lines in our patterns are very thin (some lines are 1 mm), will they not be broken under such great pressure?

->alluminium alloy it is hard, hard than other material. maybe different for you said, don't worry, normal plate all use this material.

About machine:

1. How many meters of our fabrics do you need to make tests?
->maybe 2 meters.

2.Do they have a cooling system? 

->Full Automatic heating sealing and cutting machine for cotton insulate materials no need cooling system, Normal does not need, between the heating plate and the machine  equipment has the high-temperature heat insulation plate 

3.For shipment of the machine: Will it be one independent 20 HQ container?

-> Yes, 20HQ container

4.Cutting area: is it the same as the working embossing area?  Does it mean that the max embossing area is 1000*1200 mm? And the pattern plate will be 1000*1200 mm?

-> Yes, cutting area same embossing area, max embossing size 1000*1200mm, pattern plate can't bigger than 1000*1200mm, we suggest small than this size.