hydraulic cutting machinehonggang cutting machine
More and more automatic in Cutting!
cuttingmachine-hg1
0086 15918086545
Home > Resources > News > How to maintain the cutting machine?

Resources

How to maintain the cutting machine?

How to maintain the cutting machine?


First, change the hydraulic oil
Replace the hydraulic oil for a period of one year (can be shortened or extended according to actual use), and replace the hydraulic oil while cleaning the tank and filter. Hydraulic oil Please select the regular factory brand product numbered 46#.

Second, remove dust
Removal of dust and foreign matter should be performed daily (electric dust should be handled by a professional), paying special attention to the sliding and rotating parts. Please note! Clean up dust should be done after the machine is completely shut down.

Third, tighten the bolt
Fastening bolts are an important part of the cutting machine maintenance cycle. Loose bolts that break loose for a long time can cause larger problems or accidents. It is recommended that inspections be performed every three months.

Fourth, check the lubrication system
The sliding and rotating parts of the cutting machine need to be filled with lubricating oil, and good lubrication is necessary for the operation of the machine, so regular inspection of the automatic lubrication system is particularly necessary.

Fifth, check the parallelism of the mesa
In actual use, it is not possible to cut the die at the center of the cutting machine each time. Long-time eccentricity of the center will cause the parallelism of the cutting machine to deteriorate, thereby accelerating the wear of the die and the backing plate. Regularly check the parallelism of the table, and can grasp the parallel conditions of the table of the cutting machine at any time, so as to adjust the cutting position of the cutting die during use, correct the unevenness, make the cutting machine use longer, and exert the best performance.

From Honggang Cutting Machine CO.LTD
http://www.hgcuttingsystems.com

How to maintain the cutting machine?